Setting up Rotary in LB

Discussions regarding LightBurn Software
Post Reply
Greg Paul
Posts: 44
Joined: Mon Dec 20, 2021 4:49 pm
Location: Boerne/Texas
Country: United States
Nickname: Greg
Laser Machine Make or Type: Home made twin head
Laser Power: 150w/40w
Laser Bed Size: 63"x36"
Home Position: BR
Control Software: RDWORKS
RDWorks Version: 8.0
Ruida Controller: RDC6445
Windows Version: 10

I’m trying to setup chuck rotary on CO2 laser. RDC6445 controller firm ware main board 15.01.22, Lightburn version 1.2.01. Used rotary setup. Chuck is enabled, Rotary enabled. Test will move x axis not y axis. I can move rotary manually in move window. Settings changes have no effect on rotary and using test button will move X axis not Y. Using a manual switch to change from Y to Rotary. If I run program it will turn rotary axis but at Y settings. Thanks
Post Reply

Return to “LightBurn Discussions”