How exactly do i engrave onto a item i produce ?

Post Reply
Louie Elbro
Posts: 12
Joined: Sun Jun 27, 2021 2:12 pm
Location: Raleigh NC
Country: United States
Laser Machine Make or Type: G460 80 W RECI
Laser Power: 80W
Laser Bed Size: 16X30
Home Position: TR
Control Software: RDWORKS
RDWorks Version: RDWorksV8
Ruida Controller: RDC6442
Windows Version: 10
Accessories: Industrial chiller , air compressor, extraction system

Hello there
I hope I'm in the correct place for this question .
I would like to engrave my logo onto pieces that i create , however after a internet search I'm really none the wiser . Hope the hive mind can help.
I am using Coreldraw as my main vector program and doing my best to learn it , and its "Thunder Laser" for my cutter .
many thanks
john
User avatar
Gene Uselman
Posts: 2165
Joined: Thu Jul 07, 2016 3:18 pm
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Lightburn 1.0 came out today with a system to register pieces on the cutting bed to the graphic. I had to try it and on a piece I had engraved and wanted cut slightly differently I was about .020 off [this piece is 3x4 inches so not a great thing to register. I see a lot of use for this feature in my future.

As far as how to engrave your product, we would need to know more about it- is it flat or shaped like a mushroom?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.



The days that I keep my gratitude higher than
my expectations, Well, I have really good days.

Ray Wylie Hubbard- unfortunately deceased
Post Reply

Return to “Graphics Software & How to Use”