Hi all
I have been following this forum for a while now, but after the recent crash I am unable to see pictures that people post so I thought is was time to register.
I have a blue & white 600x900 100w laser marked as an Omnitech although I have seen a few marked as Senfeng so i'm not really sure what I have.
It came with a honeycomb table (stepper adjustable height) and I have since made a mild steel table that I use magnetic pins on. It has a chuck style rotary axis although I would like to make a four wheel type to give me adjustment for bottles and the like, I have mad a TTL red dot pointer that is operated by an Arduino and a proximity switch on the lid, I have set it up to operate the air in the nozzle through RDWorks & a couple of relays.
I am using this machine to supplement my income along with a cnc router that i built and a Roland vinyl cutter.
Philip
Hi From Hobart Tasmania
-
Philip Batchelor
- Posts: 1
- Joined: Sun Apr 14, 2019
- Location: Hobart
- Country: Australia
- Nickname: Philip
- Laser Machine Make or Type: Omnitech
- Laser Power: 100
- Laser Bed Size: 600x900
- Home Position: TR
- RDWorks Version: V8.01.22
- Windows Version: Windows 7
- Accessories: Chuck type rotary axis, Honeycomb table, Steel pin bed with magnetic pins, Automatic red dot pointer, Automatic air blower.
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Philip. Hope you find some useful info here.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete