Hi Everyone.
i have access to a newly bought laser cutter/engraver in our company and was entrusted to learn to work with it and teach others.
I did manage the basics, but there is still a lot to learn. Just by browsing for a while in this forum i found a ton of helpful information. And maybe one day i can also contribute with something useful.
Regards
David
Hello from Czech Republic
-
David Brak
- Posts: 1
- Joined: Tue Apr 16, 2019
- Location: Cheb
- Country: Czech Republic
- Laser Machine Make or Type: NUMCO C 1290
- Laser Power: 100W
- Laser Bed Size: 1200 × 900 mm
- Home Position: TR
- RDWorks Version: v8.01.26
- Windows Version: 10
- Accessories: 2.5", 4" Lens
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome David- learning and teaching is perhaps our highest accomplishment. Much to learn here and pass on. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased