Hi there!
My name is Catalin and I am from Romania.
I stumbled upon Russ' youtube channel a few days ago and although my experience with laser machines is more than 4 years, I learned so much more from watching the videos.
My main job is as an engineer, but on my free time I spend time on my laser engraving and cutting business here in Romania.
Hopefully I can be of help on the forum.
Cheers.
Hello everyone
-
Catalin Sonic
- Posts: 2
- Joined: Fri Jun 07, 2019
- Location: Ploiesti
- Country: Romania
- Nickname: sonicatu
- Laser Machine Make or Type: Chinese 100W CO2 laser
- Laser Power: 100W
- Laser Bed Size: 600x400mm
- Home Position: TR
- RDWorks Version: v8
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Catalin Sonic- great name BTW. Please post pictures of your products to encourage our members to take the jump. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Catalin Sonic
- Posts: 2
- Joined: Fri Jun 07, 2019
- Location: Ploiesti
- Country: Romania
- Nickname: sonicatu
- Laser Machine Make or Type: Chinese 100W CO2 laser
- Laser Power: 100W
- Laser Bed Size: 600x400mm
- Home Position: TR
- RDWorks Version: v8
- Windows Version: 10
Hello Gene,
Following Russ' footsteps, I also broke my first CO2 laser tube after just 1 year, but not because I used too much power, but because I didn't heat up my workshop properly. I want to point this thing out because it is a pity to spend so much money on a new laser tube, since you can spend little money on heating in the cold weather.
I have attached some of my work and hopefully I can inspire more to go on this journey.
Let me know if you are interested in more pictures
Following Russ' footsteps, I also broke my first CO2 laser tube after just 1 year, but not because I used too much power, but because I didn't heat up my workshop properly. I want to point this thing out because it is a pity to spend so much money on a new laser tube, since you can spend little money on heating in the cold weather.
I have attached some of my work and hopefully I can inspire more to go on this journey.
Let me know if you are interested in more pictures
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Beautiful work- I was looking at your website, very nice. You are obviously very serious about your work/art. Thank you.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased