Hi all, I need your help how can I decide which carbon filter I should buy. I have this technical parameters for my Exhaust Fan:
Voltage: 220V
Power: 550W
Blowing Rate: 18m3
/min
Calibre Of Outlet: 80mm
Wind Pressure:1.70Kpa
Rotating Speed:2800RPM
and the place where I put it my laser is 25m2. I want to buy a carbon filter because the neighborhood where i put it my laser is in the center of the city.
So this is the page where I would buy, so I need your help to choose which one should be http://growshop-mania.mk/category/57/filtri.html
Carbon Filter
-
Aneta Shemkoska
- Posts: 2
- Joined: Wed Oct 30, 2019
- Location: Skopje
- Country: North Macedonia
- Nickname: AnetSh
- Laser Machine Make or Type: SCU1290
- Laser Power: 100W
- Laser Bed Size: 51"x 35"
- Home Position: TR
- RDWorks Version: V8.1.40
- Windows Version: Windows 10
-
Martin Overberg
- Posts: 6
- Joined: Tue May 23, 2017
- Location: Herzebrock
- Country: Germany
- Nickname: Martin
- Laser Machine Make or Type: China Red/Black
- Laser Power: 60W
- Laser Bed Size: 500 mm x 700 mm
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 0.9.16
- Ruida Controller: Other
- Windows Version: 10
- Accessories: Rotary device
18 m³/min equals approx 1000 m³/h
Try to get the biggest one (3000m³/h)
=> It will have the lowest pressure drop
=> The smaller the filter, the higher the pressure drop, the more the air flow is reduced.
=> You get more activated carbon which will have a longer service live
Try to get the biggest one (3000m³/h)
=> It will have the lowest pressure drop
=> The smaller the filter, the higher the pressure drop, the more the air flow is reduced.
=> You get more activated carbon which will have a longer service live
Martin