It's Me! Another Newb.
-
Mark Widmann
- Posts: 1
- Joined: Thu Dec 19, 2019
- Location: cedar falls ia
- Country: america
- Nickname: Chefmark
- Laser Machine Make or Type: Looking to purchase
- Laser Power: na
- Laser Bed Size: na
- Home Position: TL
- RDWorks Version: na
- Windows Version: 10
I'm Mark. I have a shop i built. I make glassware. Laser engraving seems like the natural progression. I've no idea how to do it. So here i am!
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Mark, pretty much all of us did not know how to do it when we bought this Chinese laser thing. Many have come a long way and some of us still need a lot of help. If you have not already, check out RDWorks Learning Lab on youtube and you will have a super head start that many of us did not have when we started. If you can't find the answers to your questions in searching the forum, ask away, someone will help.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy