Hi Everyone
I'm John and signing in from the Cairngorms National Park in Scotland. I have a PureLaser 60 Watt laser cutter which I use for producing artwork and crafts. I'm relatively new to laser cutting, and was left a bit high and dry by virtue of the fact that the company I bought my machine from went bust about three weeks after it was delivered. So no after sales support, and no intelligible instructions or manual (just the bare bones of a manual from China which is pretty much indecipherable!). So any help from here will be greatly appreciated!
I look forward to having fruitful discussions with many of you!
Regards
John
Hello from Scotland
-
John Polak
- Posts: 1
- Joined: Fri Feb 28, 2020
- Location: Ballindalloch
- Country: United Kingdom
- Nickname: John
- Laser Machine Make or Type: Radical Pure Laser
- Laser Power: 60W
- Laser Bed Size: 750mm x 550mm
- Home Position: TR
- RDWorks Version: v8.01.18
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome John- we have an English version of the Ruida manual that may be of interest to you. I would also start with our FAQ section- there is a lot of good info there, and please ask any questions you may still have as we have many knowledgeable and helpful members. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased