Greetings from middle America
-
Dave Law
- Posts: 4
- Joined: Thu Apr 16, 2020
- Location: Derby,KS
- Country: USA
- Laser Machine Make or Type: Orion Motor Tech SH-G460
- Laser Power: 60W
- Laser Bed Size: 400mm x 600mm
- Home Position: TL
- RDWorks Version: 8.01.18
- Windows Version: 10 Pro
- Accessories: Rotary engraving adapter
I'm a retired engineer and just got a 60W laser engraver/cutter. I started with an open frame LED laser that just wouldn't do what I needed to do. I've been watching Russ Sadler's RDWorks Learning Lab videos and learning a lot about CO2 lasers. I could tell he was an engineer from the first videos I watched before I saw his first Learning Lab introduction video.
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Dave, glad you found your way here. Do some searching and reading and have fun.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy