New to Ruida control
-
Alan Herbison
- Posts: 1
- Joined: Sun Jun 14, 2020
- Location: Salt lake city, Utah
- Country: USA
- Laser Machine Make or Type: Orion
- Laser Power: 50w
- Laser Bed Size: 12" x 20"
- Home Position: TL
- RDWorks Version: 8.01.18
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Roller
I've been using scorch works. I've acquired a new laser with ruida control and look forward to learning the software.
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Welcome along 
My current little Laser runs the M2 board and apart from the first week of suffering until I found Scorchworks and it works really well and simply. About to go down the path of a Ruida controller and at this stage using Lightburn instead of RDWorks so maybe download the trial version and look at both before sinking yourself into one path.
My current little Laser runs the M2 board and apart from the first week of suffering until I found Scorchworks and it works really well and simply. About to go down the path of a Ruida controller and at this stage using Lightburn instead of RDWorks so maybe download the trial version and look at both before sinking yourself into one path.