Hi guys
here's my introduction I was suggested this group from a fellow on Facebook that did an amazing job with a CAD drawing of a laser I'm thinking about building the y1200.
I have a k40 but I'm realizing that that is not big enough for my needs I also have just recently built a CNC workbee1515 and several 3D printers. I'm on the fence right now between a y1200 and a prebuilt 80w Chinese laser. Probably a preenex. I've been working a lot the last few days so I haven't had time to look through the forums yet and I also have not completed Russ videos but they are on my list as free time makes itself available.
Hi guys
-
Jason Clifford
- Posts: 1
- Joined: Sun Jun 21, 2020
- Location: Brunswick GA
- Country: United States
- Nickname: Jason
- Laser Machine Make or Type: K40 for now
- Laser Power: 35w
- Laser Bed Size: 8x10
- Home Position: TL
- RDWorks Version: V8.01.18
- Ruida Controller: Other
- Windows Version: 10
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Jason- we have a couple members building the laser you mention who are documenting the build and expanding upon it. Russ is a great basic education in the world of lasering and we try to provide some of the info he might have missed and we have a ton of helpful people here. Dig in. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Hi Jason, welcome along 
As you have outed yourself as an Electrician elsewhere and if you have some time I wouldn't mind another set of trained eyes with a Laser background go over my Layout and let me know if it needs a tweak here or there viewtopic.php?f=160&t=4823&sid=1da4d8ef ... 114f501c4b and help keep the Darwin Award winners away from Laser building and wiring
As you have outed yourself as an Electrician elsewhere and if you have some time I wouldn't mind another set of trained eyes with a Laser background go over my Layout and let me know if it needs a tweak here or there viewtopic.php?f=160&t=4823&sid=1da4d8ef ... 114f501c4b and help keep the Darwin Award winners away from Laser building and wiring