Hello all users here!
My name is Anthony and I work for Metaquip, a small company wich sells and maintains lasercutters in various sizes.
We are mostly active in The Netherlands and Belgium but we have placed machines all through Europe.
Besides the CO2 machines we also sell fiber-metal cutter/engravers.
Our biggest CO2 cutter for now is a 4 by 2 meters portal wich moves to the Czech Republic soon.
The smallest machine in our range is a 40x40 cm tabletop.
Our lasertubes go from 40Watt up to 300Watt but the most common range stays in between 80-130 Watt.
I reached this forum when I had to search for a problem I couldn't inmediately solve. Unfortunately there was no thread about the problem yet.
I hope to help ppl here as others could help me sometimes.
Have fun!!
Hello from the Netherlands
-
Anthony Staals
- Posts: 3
- Joined: Wed Sep 09, 2020
- Location: Nederland
- Country: Noord Brabant
- Laser Machine Make or Type: Metaquip
- Laser Power: various
- Laser Bed Size: 4040 up to 1590
- Home Position: TR
- RDWorks Version: v8.01.40
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Rotating unit
- Contact:
Happy to help you
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Anthony- I would post your problem as we have some very knowledgeable members and we may be able to help you. Gene
I looked at your website and was pleased to see that English was supported for those of us who are monolingual. Quite a range of different applications- that must be a lot to support?
I looked at your website and was pleased to see that English was supported for those of us who are monolingual. Quite a range of different applications- that must be a lot to support?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Anthony Staals
- Posts: 3
- Joined: Wed Sep 09, 2020
- Location: Nederland
- Country: Noord Brabant
- Laser Machine Make or Type: Metaquip
- Laser Power: various
- Laser Bed Size: 4040 up to 1590
- Home Position: TR
- RDWorks Version: v8.01.40
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Rotating unit
- Contact:
Hello Gene,
We believe it's really important to communicate in more than one language. Luckily we are able to speak German and English besides our Dutch language. Though our French isn't so great, we still understand the needs of our customers
The company is founded in 2015 and the support is growing more and more. Partly because 'old' machines start to get tired once and a while, at the other side, there are new markets/users with special demands. We work hard to serve both sides.
The problem I mentioned before was probably a bad connection or a bad powersupply. The panel was stuck with the text: "connecting to controller".
After suggesting to test the connection and secundary test the 24V powersupply, the client solved the problem. (At least, they would have contacted me if it didn't work )
We believe it's really important to communicate in more than one language. Luckily we are able to speak German and English besides our Dutch language. Though our French isn't so great, we still understand the needs of our customers
The company is founded in 2015 and the support is growing more and more. Partly because 'old' machines start to get tired once and a while, at the other side, there are new markets/users with special demands. We work hard to serve both sides.
The problem I mentioned before was probably a bad connection or a bad powersupply. The panel was stuck with the text: "connecting to controller".
After suggesting to test the connection and secundary test the 24V powersupply, the client solved the problem. (At least, they would have contacted me if it didn't work
)Happy to help you