new to forum from Oregon
-
Nathan Love
- Posts: 2
- Joined: Sat Nov 14, 2020
- Location: Tualatin
- Country: United States
- Nickname: bearingman
- Laser Machine Make or Type: Digi-Carver (china)
- Laser Power: 60w
- Laser Bed Size: 700x500mm
- Home Position: TR
- RDWorks Version: v8.01.18
- Ruida Controller: Other
- Windows Version: 10 64bit
- Accessories: ultimate air assist
Recently retired from industrial bearing sales, but have been using cnc routers for about 6 years. My brother is Us distributor for Lasers and routers. He sells them and I play with them (I do the demos).
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Nathan- if this is a new machine [seems odd it would have a 320 controller if it is new, that is a pretty old controller] and you installed a 6442 or similar controller you are probably figuring out the machine parameters? Your other post about the overrun, I would say was normal, whether a faster speed will actually take less time varies with what the job requires. The 320 should have been the same, maybe you just did not notice it? I normally engrave at 300 mm/sec and very occasionally it may be 4-500 depending upon how the engraving is laid out. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Bryan Kelly
- Posts: 66
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
welcome aboard.....enjoy