New member
-
Brian Pechan
- Posts: 6
- Joined: Sun Dec 06, 2020
- Location: Wisconsin
- Country: USA
- Laser Machine Make or Type: Rabbit Laser 9060
- Laser Power: 80
- Laser Bed Size: 23” x 35”
- Home Position: TR
- RDWorks Version: v8.01.26
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Camera, Rotary
I’ve had my laser for about 8 years. Added Ruida 6445 controller and LightBurn earlier this year. Just added camera and bought a couple rotaries. Setting up the rotaries now.
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Brian- I visited Rabbit laser a few years back and they are a great company. If you have any questions please ask. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Brian Pechan
- Posts: 6
- Joined: Sun Dec 06, 2020
- Location: Wisconsin
- Country: USA
- Laser Machine Make or Type: Rabbit Laser 9060
- Laser Power: 80
- Laser Bed Size: 23” x 35”
- Home Position: TR
- RDWorks Version: v8.01.26
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Camera, Rotary
Thanks Gene. I met Ray when he delivered my machine. He seems very knowledgeable about what he sells.
My current plan is to upgrade the firmware on my 6445 controller to what I heard is a new special version that allows to switch between my y-axis drive and the new u-axis drive I just added for my rotary in software. I may need some help locating the correct version of that firmware and a copy of the firmware I currently have as a backup in case it doesn’t work out and I want to go back.
Brian
My current plan is to upgrade the firmware on my 6445 controller to what I heard is a new special version that allows to switch between my y-axis drive and the new u-axis drive I just added for my rotary in software. I may need some help locating the correct version of that firmware and a copy of the firmware I currently have as a backup in case it doesn’t work out and I want to go back.
Brian