Hello

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Orestes Pouliasis
Posts: 11
Joined: Tue Dec 29, 2020
Location: Athens
Country: Greece
Nickname: orestes
Laser Machine Make or Type: 30x50 Trocen AWC708S
Laser Power: 50W
Laser Bed Size: 30x50 cm
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: 8
Ruida Controller: Other
Windows Version: 10

Hello,

I recently got a 50W 30x50cm Chinese laser cutter fitter with a 1.5" lens and a Trocen AWC708C controller. I'm trying to set it up for rubber engraving and so far I had little success. I was hoping someone from this forum could point me in the right direction. Hopefully I will make a thread on this, in the appropriate section, soon.

Happy holidays.

Regards,
Orestes
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Welcome Orestes. Recommend reviewing the FAQ section and backing up your vendor setting if have not already.
See link below discussing manufacture of rubber stamps -should provide insights to engraving rubber even if you are not making stamps.

viewtopic.php?f=112&t=5139&p=27208&hilit=rubber#p27208
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Post Reply

Return to “New Members - Introduce Yourself First”