Hello,
I recently got a 50W 30x50cm Chinese laser cutter fitter with a 1.5" lens and a Trocen AWC708C controller. I'm trying to set it up for rubber engraving and so far I had little success. I was hoping someone from this forum could point me in the right direction. Hopefully I will make a thread on this, in the appropriate section, soon.
Happy holidays.
Regards,
Orestes
Hello
-
Orestes Pouliasis
- Posts: 11
- Joined: Tue Dec 29, 2020
- Location: Athens
- Country: Greece
- Nickname: orestes
- Laser Machine Make or Type: 30x50 Trocen AWC708S
- Laser Power: 50W
- Laser Bed Size: 30x50 cm
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: 8
- Ruida Controller: Other
- Windows Version: 10
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Orestes. Recommend reviewing the FAQ section and backing up your vendor setting if have not already.
See link below discussing manufacture of rubber stamps -should provide insights to engraving rubber even if you are not making stamps.
viewtopic.php?f=112&t=5139&p=27208&hilit=rubber#p27208
See link below discussing manufacture of rubber stamps -should provide insights to engraving rubber even if you are not making stamps.
viewtopic.php?f=112&t=5139&p=27208&hilit=rubber#p27208
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete