Top Wisdom to Ruida conversion
-
Alfred Breitkreuz
- Posts: 4
- Joined: Tue Feb 16, 2021
- Location: Lacombe, Alberta
- Country: Canada
- Laser Machine Make or Type: Redsail
- Laser Power: 100w
- Laser Bed Size: 47"x35"
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8.1
- Ruida Controller: RDC6445
- Windows Version: 10
I'm converting my old TopWisdom TL-403 to a Ruida RDC4554G controller. The motherboard switch over has gone fine. Except I have one wire from the TopWisdom board that I don't have a clue where it goes. It is the U origin Limit labelled IN-8. Also I'm wondering if there is a diagram or something out there that would help me with the wiring switch over for the power supply. Would greatly appreciate any help.
-
Alfred Breitkreuz
- Posts: 4
- Joined: Tue Feb 16, 2021
- Location: Lacombe, Alberta
- Country: Canada
- Laser Machine Make or Type: Redsail
- Laser Power: 100w
- Laser Bed Size: 47"x35"
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8.1
- Ruida Controller: RDC6445
- Windows Version: 10
Small typo correction it should be RDC6445G
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
The U channel is not used so it should not need a limit switch. I am on vaca so I don't have my schematics here but if you search for the controller # you should find it.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased