Hello from Yorkshire
-
Mike Clacko
- Posts: 2
- Joined: Fri Apr 23, 2021
- Location: Yorkshire
- Country: UnitedKingdom
- Nickname: Mclacko
- Laser Machine Make or Type: Red and black
- Laser Power: 60w
- Laser Bed Size: 700 x 500
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.52
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary
Many thanks for allowing me to join the forum, I am new to laser’s, but have a Chinese red and black 60w laser. I’m managing to find my way around it at the moment but I’m sure I’ll have many questions over time. Really enjoy watching Russ’s YouTube videos which I find very informative.
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Mike, we recommend saving your Vendor/user settings right away as they are easily lost. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Mike Clacko
- Posts: 2
- Joined: Fri Apr 23, 2021
- Location: Yorkshire
- Country: UnitedKingdom
- Nickname: Mclacko
- Laser Machine Make or Type: Red and black
- Laser Power: 60w
- Laser Bed Size: 700 x 500
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.52
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary
Many thanks for the recommendation Gene of backing up the vendor settings, I do have a backup of these settings all but a little to late. I learnt the hard way and had to redo the settings after a machine glitch. So the first thing i did when i managed to get it back working something like was to do the backup, these are now stored away safely just in case.