Hello from Dallas, Texas

Post Reply
John Stuch
Posts: 1
Joined: Tue Oct 05, 2021
Location: Dallas, TX
Country: USA
Laser Machine Make or Type: 50W Chinese
Laser Power: 50W
Laser Bed Size: 300x500
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: n/a
Ruida Controller: RDC6442
Windows Version: 10

Well, actually from Sachse, but nobody knows where that is. :)

I've been working with a 50 watt laser engraver for 2+ years. Chinese, blue box 300x500 bed. Use Lightburn for designing and controlling the Ruida. My power supply just went out, so I figured this was a good time to do some upgrades, and get on some of the forums for research and advice.

Thanks!

John
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Welcome John- you do have a good opportunity to upgrade- it is normally not that hard if you don't go to an extremely long tube. You should be able to find a few threads about upgrading, if you have questions, please ask. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “Tell Us About You”