Hi,
I have been running my machine for about 2 years and have had niggles and solved them.
A few weeks ago the machine made a pop at start-up and the x/y did not move, no power to the control panel.
The laser fires on the test button on main PSU, and water cooling is flowing.
No light on the small PSU
D-150
Input: 100-120VAC 3.2A
200-240VAC 1.6A
50/60HZ
Output: +24V 6.0A
+5V 2.0A
Any ideas of a direct swap I cannot find anything !?
Matt
Hardware sourcing help needed please
-
Matt Smith
- Posts: 3
- Joined: Tue Jan 18, 2022
- Location: Blackpool, Lancashire
- Country: United Kingdom
- Nickname: Matt
- Laser Machine Make or Type: KH7050
- Laser Power: 80W
- Laser Bed Size: 700x500
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: RDWorks V8
- Ruida Controller: Other
- Windows Version: windows 10
-
Matt Smith
- Posts: 3
- Joined: Tue Jan 18, 2022
- Location: Blackpool, Lancashire
- Country: United Kingdom
- Nickname: Matt
- Laser Machine Make or Type: KH7050
- Laser Power: 80W
- Laser Bed Size: 700x500
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: RDWorks V8
- Ruida Controller: Other
- Windows Version: windows 10
Replacement for this.
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I would look a something like this.
https://www.amazon.com/LRS-150-24-Switc ... 4CWW&psc=1
Meanwell is a good brand- look at the comparable and pick the closest one to yourx.
https://www.amazon.com/LRS-150-24-Switc ... 4CWW&psc=1
Meanwell is a good brand- look at the comparable and pick the closest one to yourx.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased