Hello from Germany, I have no experience with a laser only with a 3D printer and have now bought a 100w and probably caused the first havoc, factory reset...
Many greetings
Sascha
a new one says hello
-
Sascha Pamperin
- Posts: 3
- Joined: Fri May 06, 2022
- Location: DUISBURG
- Country: Deutschland
- Laser Machine Make or Type: vevor
- Laser Power: 100
- Laser Bed Size: 60x90
- Home Position: BR
- Control Software: RDWORKS
- RDWorks Version: 8
- Ruida Controller: Other
- Windows Version: 9
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Sascha- the first thing we recommend is to save your Vendor files [and you now know why]. I answered your other post and hope we can guide you to success- the lost files can be a very hard thing to replace. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased