Gday

[Grant Shuttleworth]

Hi, I recently imported an HT-1390 1300X900mm c02 machine from china. It came with a rotary/, chiller and150watt W6 tube.
Prior to this unit (we still have it) we were using the GCC mercury 3 laser which is a 12 watt sealed laser tube and 635 mm x 458mm bed.

I tried using RDworks but having used Lightburn before I found it difficult so have upgraded my LB license to be compatible with the DSP controller.

I've attached one of the 1st projects I cut on the laser which is a free illustrator cut file I found somewhere online. Not sure Im allowed to share links here...if so let me know and Ill share the link.

[Pete Cyr]

Welcome Grant, you can share anything you wish so long as it does not violate any copyright laws.
The only rules here are to be nice and conform to US laws.

Using Light Burn I believe it automatically backs up your vendor files, but if you have not done so, I recommend doing so because they are easy to corrupt and difficult to recover.