Queen Anne chair leg- 2" tall

Place to post pictures of work you are proud of.
Post Reply
User avatar
Gene Uselman
Posts: 2164
Joined: Thu Jul 07, 2016 3:18 pm
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

I just cut this from a ,75 common pine board as a test. I am either suffering brain fog [confusion, memory issues, etc] or beginners Alzheimer's and I try to keep doing mental acuity tests to keep score. My sweetie collects miniature chairs and I have made few for her and was trying to find something that would be challenging to design and laser cut. I am impressed. Gotta go home now but will post a how-to if anyone is interested. No sanding- just a small wire brush prep. Gene
Queen_Anne.jpg
You do not have the required permissions to view the files attached to this post.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.



The days that I keep my gratitude higher than
my expectations, Well, I have really good days.

Ray Wylie Hubbard- unfortunately deceased
User avatar
Gareth Lewis
Posts: 32
Joined: Mon Jan 03, 2022 12:35 pm
Location: Aberdare, RCT, Wales
Country: United Kingdom
Nickname: Gareth
Laser Machine Make or Type: Tangerine Tiger
Laser Power: 50W
Laser Bed Size: 300 x 500
Home Position: BL
Control Software: RDWORKS
RDWorks Version: v8.01.47
LightBurn Version: v1.5.03
Ruida Controller: RDC6442
Windows Version: 10
Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
Contact:

Hi Gene,

It looks an impressive design.

What power / lens are you using to cut 0.75" pine board?
User avatar
Gene Uselman
Posts: 2164
Joined: Thu Jul 07, 2016 3:18 pm
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

I have a 130w tube from LightObject in Calif [they test each tube and it rated at 150w] and a 2 inch lens. Speed is 4mm/sec and I overdrive the tube for special projects [ rating is 28 mA]. I sold my company and the new owner lets me have a corner of one building and is happy to buy new tubes when necessary. It is a profitable business that I built from zero. I have had the Laser since 2015.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.



The days that I keep my gratitude higher than
my expectations, Well, I have really good days.

Ray Wylie Hubbard- unfortunately deceased
Post Reply

Return to “Be Proud of Your Work”