If your home is NOT right rear, be careful, the head will crash if you don't hit the Escape button in time.
.
1300x900 130w with home in right rear corner
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
You do not have the required permissions to view the files attached to this post.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Robin Croen
- Posts: 10
- Joined: Sat Apr 04, 2020
- Location: Seattle, WA
- Country: United States
- Laser Machine Make or Type: Chinese Red & Black
- Laser Power: 130W
- Laser Bed Size: 35" x 55"
- Home Position: TR
- RDWorks Version: 8
- Windows Version: 10
THANK YOU. This saved me a lot of heartache 
-
Guy Kass
- Posts: 3
- Joined: Mon May 03, 2021
- Location: Easton, PA
- Country: United States
- Nickname: Guy
- Laser Machine Make or Type: No brand Chinese
- Laser Power: 60
- Laser Bed Size: 24x16
- Home Position: BL
- Control Software: LIGHTBURN
- RDWorks Version: 8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: mac
- Accessories: 1390 130w Chinese Import
Rear right starting point
Ruida controller
Hi-
Apologies for bringing up an old thread, but it looks like it may help me.
I am having the same issues that another person was having that lead me to this. (viewtopic.php?hilit=grinding%20noise&p= ... d2473ebcb5)
I see the files, and I think I have an idea of what they're for, but no idea what to do with them.
Any chance anyone could help me with this???
Thanks a million!
Guy
Apologies for bringing up an old thread, but it looks like it may help me.
I am having the same issues that another person was having that lead me to this. (viewtopic.php?hilit=grinding%20noise&p= ... d2473ebcb5)
I see the files, and I think I have an idea of what they're for, but no idea what to do with them.
Any chance anyone could help me with this???
Thanks a million!
Guy
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Guy,
Bit tied up at the moment, But I'll try and respond fully later today.
Bit tied up at the moment, But I'll try and respond fully later today.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Guy,
Turn on your laser system and make sure it's connected to your PC.
Open up RDWorks
Make sure your laser is chosen in the Device at the bottom Right hand corner.
File / Vendor Settings / (Password= RD8888)
Click Read
This will populate your parameters.
I would save what you have on your machine EG "myMachineDDMMYYYY.RDVSet"
If you have a compatible .RDWSet file, click open and navigate to where the file is stored. Select file and click open.
Then "Write" the new file settings to your laser system. Please note: this can mess your laser system up if the file is not suitable. But if you saved your original file, you have a fall back position.
Go to User in the Right hand window (it's a tab in the group that contains Work | Output | Doc | User | Test | Transform
Click read and save the file.
Then If you have a compatible .RDUSet file, click open and navigate to where the file is stored. Select file and click open.
Then "Write" the new file settings to your laser system. Please note: this can mess your laser system up if the file is not suitable. But if you saved your original file, you have a fall back position.
Hopefully this will make sense.
I have access to a number of files for the Back RHC homing 3040, 4060, 6090, 1290, 1490, 1610 and for a Back LHC homing 5030 system.
You do this at your own risk, but ensuring you have back up files will mitigate the risk.
Turn on your laser system and make sure it's connected to your PC.
Open up RDWorks
Make sure your laser is chosen in the Device at the bottom Right hand corner.
File / Vendor Settings / (Password= RD8888)
Click Read
This will populate your parameters.
I would save what you have on your machine EG "myMachineDDMMYYYY.RDVSet"
If you have a compatible .RDWSet file, click open and navigate to where the file is stored. Select file and click open.
Then "Write" the new file settings to your laser system. Please note: this can mess your laser system up if the file is not suitable. But if you saved your original file, you have a fall back position.
Go to User in the Right hand window (it's a tab in the group that contains Work | Output | Doc | User | Test | Transform
Click read and save the file.
Then If you have a compatible .RDUSet file, click open and navigate to where the file is stored. Select file and click open.
Then "Write" the new file settings to your laser system. Please note: this can mess your laser system up if the file is not suitable. But if you saved your original file, you have a fall back position.
Hopefully this will make sense.
I have access to a number of files for the Back RHC homing 3040, 4060, 6090, 1290, 1490, 1610 and for a Back LHC homing 5030 system.
You do this at your own risk, but ensuring you have back up files will mitigate the risk.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts! Need help? Contact me: admin@laseruser.com-
Guy Kass
- Posts: 3
- Joined: Mon May 03, 2021
- Location: Easton, PA
- Country: United States
- Nickname: Guy
- Laser Machine Make or Type: No brand Chinese
- Laser Power: 60
- Laser Bed Size: 24x16
- Home Position: BL
- Control Software: LIGHTBURN
- RDWorks Version: 8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: mac
- Accessories: 1390 130w Chinese Import
Rear right starting point
Ruida controller
Hi Gareth-
Thank you very much. I am going to give it a shot in a bit.
Thanks again!
Guy
Thank you very much. I am going to give it a shot in a bit.
Thanks again!
Guy