Hi all I’m new here and just looking for some good advise on light burn in that won’t connect via Ethernet
I get it to do a frame fine but when sending a file it says it busy
New here
-
rcmodelstore
- Posts: 1
- Joined: Sat Oct 19, 2024
- Location: england
- Country: united kindom
- Laser Machine Make or Type: red and balck
- Laser Power: 80w
- Laser Bed Size: 500x700
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8
- LightBurn Version: 1.4
- Ruida Controller: RDC6442
- Windows Version: 11
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi RCModelStore,
Welcome to the Forum.
Reference your Lightburn issue, I also use Ethernet and it can be temperamental on my system. Couple of things to check;
1. do you have sufficient storage space on your controller?
2. are the connectors fitted securely
3. have you set up your laser system correctly? It needs to be set up as an Ethernet and the IP address on the new device and your laser need to match.
Welcome to the Forum.
Reference your Lightburn issue, I also use Ethernet and it can be temperamental on my system. Couple of things to check;
1. do you have sufficient storage space on your controller?
2. are the connectors fitted securely
3. have you set up your laser system correctly? It needs to be set up as an Ethernet and the IP address on the new device and your laser need to match.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com