Hi,
I was wondering if anyone could help me. I need to replace the stepper motor on the z-axis. It is a small nema 23（https://www.oyostepper.es/category-7-b0 ... MA-23.html
） . I want to replace it with some motors with more torque. Is it possible to use a hybrid motor only on the z-axis? I am using a CS-Labs CSM10/IP-M motion controller and Mach3. Thanks
Hybrid stepper motor
-
Sherry
- Posts: 1
- Joined: Wed Feb 12, 2025
- Location: Singapore
- Country: Singapore
- Laser Machine Make or Type: cnc
- Laser Power: 100W
- Laser Bed Size: 16" x 30"
- Home Position: BR
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: V1.5.03
- Ruida Controller: RDC6445
- Windows Version: 18
-
Gareth Lewis
- Posts: 114
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.71
- LightBurn Version: v2.1.03
- Ruida Controller: RDC8445
- Windows Version: 11
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
The Hybrid stepper servo motor set-up still uses a standard stepper motor. Is there a particular reason you need to updrade the stepper motor on the Z-axis? Normally the Z-axis is specified as a standard stepper motor even on systems that utilise Hybrid stepper servo technology on their X & Y axis.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: [email protected]
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: [email protected]