Re: Installation of Ultimate Air Assist
Posted: Tue Jul 21, 2020
Hi, sorry for the probably silly question but I'm cabling the air assist and still worry about the diode 
Could someone tell me if it's ok as on this picture : (orientation of the white bar on the diode and cables?)
The brown wire is connected to +24V, the green on wind, the white on status and the yellow will be the ground for the switch... Thanks a lot
Could someone tell me if it's ok as on this picture : (orientation of the white bar on the diode and cables?)
The brown wire is connected to +24V, the green on wind, the white on status and the yellow will be the ground for the switch... Thanks a lot