Re: Laser wont cut through corners
Posted: Mon Mar 08, 2021
Most folks start having issues with their glass tubes around 5 years.
I would try upping power to 75% and reduce speed to 2mm/s and see what the result may be.
Based upon the earlier data/checks we discussed all be sat all that is left is you are not getting all the power you are use to.
I would try upping power to 75% and reduce speed to 2mm/s and see what the result may be.
Based upon the earlier data/checks we discussed all be sat all that is left is you are not getting all the power you are use to.