Hello from Minnesota

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Richard Remiarz
Posts: 4
Joined: Sat Apr 17, 2021
Location: Vadnais Heights, MN
Country: USA
Nickname: Rich
Laser Machine Make or Type: 50W blue & white purchased from Orion Motor Tech
Laser Power: 50W
Laser Bed Size: 12 " x 20"
Home Position: TL
Control Software: RDWORKS
RDWorks Version: V8.01.49
Ruida Controller: RDC6445
Windows Version: 10 Home
Accessories: rotary axis

Rodney,

I model the Great Northern and Northern Pacific in central Minnesota in 1956 in HO scale. I would interested in sharing files with you and Jeff. Jeff has already sent me a few files to help get me started using the laser cutter. I will also be helping build some structures for friend's layout. One of my first efforts will be modeling the Sussex, NJ depot on the NYS&W for Jerry Dziedzic's layout. This building was one of the things that helped convince me to buy the laser cutter. I was struggling finding ways of modeling the various arched windows (with wooden shutters) and decorative supports for the full-length awnings on each side of the depot.

Sincerely,
Rich Remiarz
Top
Rodney Edington
Posts: 97
Joined: Wed Feb 24, 2021
Location: Leavenworth Ks
Country: USA
Nickname: Rodney
Laser Machine Make or Type: K 40 Building a 22"X 38"
Laser Power: 60 watt
Laser Bed Size: 22"X38"
Home Position: TL
Control Software: RDWORKS
RDWorks Version: NA
Ruida Controller: RDC6445
Windows Version: 7

Hi Rich
Sent a PM
Rodney

Here is my build
viewtopic.php?f=159&t=5526&start=20
Top
Post Reply

Return to “New Members - Introduce Yourself First”