LaserUser.com Forum (formerly RDWorksLab)

Pete, I think it would be good to also include the home position with the settings? If the settings were from a machine that homes upper left and the members limit switches were upper right, trouble would ensue? I think most are upper right but I sometimes see upper left and occasionally bottom L or Right.

This files in this thread also work for 5030 machines. This message is here so that one will find the thread if one searches for 5030 recovery or 5030 vendor settings.

Just wanted to say that it was these files that lead me to the forum in the first place.
Now have RD works installed these files downloaded and going to attempt to update and start working back from there to get my 2nd hand erratic machine working .. From turn on it crashes it head into top left etc , so the mission starts here .!

Thanks for the amazing useful information on the site.

Hi! Just wanted to thank for these files, worked with minor adjustments for one of my machines that I reseted without knowing what I was doing.

Can I upload my files to the forum? Later I will take some pics and specs from my two co2 machines and save the vendor and user setting files.

Andre Ferrandis wrote: Tue Mar 08, 2022 Hi! Just wanted to thank for these files, worked with minor adjustments for one of my machines that I reseted without knowing what I was doing.

Can I upload my files to the forum? Later I will take some pics and specs from my two co2 machines and save the vendor and user setting files.

Can I upload my files to the forum?

Yes - -Please list the full machine name/model to help the next person that may need the same.