Page 1 of 1
What Lens is build in ??
Posted: Sun Mar 31, 2019
by Matthias Roschk
Hello,
i bought this Laser some days ago:
https://www.ebay.de/itm/50W-CO2-Laser-G ... 2749.l2649
But i wonder a little bit what lens exactly is build in my Machine and in the videos ( i really enjoy ) from SarbarMultimedia
, like this i am looking at the moment:
https://www.youtube.com/watch?v=1tw7Jg5zStc
He is talking about a space between the Lens and the Material of about 5mm, but i get a space mesuring tool with the Mchine which is
about 20mm long.
So my space between the material is about 20mm and not 5mm.
Now i am wondering if in my Machine is another lens build in (and why )
Also i want to know what Lens ( in Zoll ) is build in ? Can i mesure this maybe ?
In the documents i did not found anything about what lens is build in
But i know the Lens is 18mm, but that is more or less all i know
Matthias
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Pete Cyr
You will have to measure the distance - this video is the easiest way to determine the focal length of your installed lens
https://www.youtube.com/watch?v=v0znprj3xsw
These links explain more info but don't specifically answer you question
https://www.parallax-tech.com/faq.htm
the link above is useful but only some of the data answers the question you have asked.
The file below contains a table from the link above.
Lens Size by Focal Length.pdf
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Matthias Roschk
Thanks a lot for the Infos.
Because it is too late now, i have to check my lens tomorrow
But it seams, after a very short look, a higher Focal length gives a bigger Range for the Focus.
Matthias
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Pete Cyr
Matthias Roschk wrote: Sun Mar 31, 2019
Hello,
i bought this Laser some days ago:
https://www.ebay.de/itm/50W-CO2-Laser-G ... 2749.l2649
But i wonder a little bit what lens exactly is build in my Machine and in the videos ( i really enjoy ) from SarbarMultimedia
, like this i am looking at the moment:
https://www.youtube.com/watch?v=1tw7Jg5zStc
He is talking about a space between the Lens and the Material of about 5mm, but i get a space mesuring tool with the Mchine which is
about 20mm long.
So my space between the material is about 20mm and not 5mm.
Now i am wondering if in my Machine is another lens build in (and why )
Also i want to know what Lens ( in Zoll ) is build in ? Can i mesure this maybe ?
In the documents i did not found anything about what lens is build in :-)
But i know the Lens is 18mm, but that is more or less all i know
Matthias
So my space between the material is about 20mm and not 5mm
-Laser focal distance.jpg
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Pete Cyr
Matthias Roschk wrote: Sun Mar 31, 2019
Thanks a lot for the Infos.
Because it is too late now, i have to check my lens tomorrow :-)
But it seams, after a very short look, a higher Focal length gives a bigger Range for the Focus.
Matthias
The smaller the lens, the finer the spot size, the smaller the spot size the finer the detail you can engrave.
The larger the focal lens the thicker cutting you can perform up to a point - laser power will be a big factor in how deep you cut.
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Matthias Roschk
exactly.
Russ has ( i think ) the same Machine then mine is.
But his "Distance to mesure the Focus" is about only 5mm but mine is about 20mm.
Means that his Machine has another lens build in ?
Matthias
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Pete Cyr
He has many lens. He use to use a 1.5.
Now he uses a compound lens assembly - he has installed 2 lens in the nozzle
RDWorks Learning Lab 139 Designing a Compound Lens System
https://www.youtube.com/watch?v=sp2O6komevw
Re: What Lens is build in ??
Posted: Sun Mar 31, 2019
by Matthias Roschk
very theoretical and complicated, but also very interesting !!
Thanks, i have to study ( and translate ) it, because i am not a natural english speaking
Matthias