Hi From Hobart Tasmania
Posted: Sun Apr 14, 2019
Hi all
I have been following this forum for a while now, but after the recent crash I am unable to see pictures that people post so I thought is was time to register.
I have a blue & white 600x900 100w laser marked as an Omnitech although I have seen a few marked as Senfeng so i'm not really sure what I have.
It came with a honeycomb table (stepper adjustable height) and I have since made a mild steel table that I use magnetic pins on. It has a chuck style rotary axis although I would like to make a four wheel type to give me adjustment for bottles and the like, I have mad a TTL red dot pointer that is operated by an Arduino and a proximity switch on the lid, I have set it up to operate the air in the nozzle through RDWorks & a couple of relays.
I am using this machine to supplement my income along with a cnc router that i built and a Roland vinyl cutter.
Philip
I have been following this forum for a while now, but after the recent crash I am unable to see pictures that people post so I thought is was time to register.
I have a blue & white 600x900 100w laser marked as an Omnitech although I have seen a few marked as Senfeng so i'm not really sure what I have.
It came with a honeycomb table (stepper adjustable height) and I have since made a mild steel table that I use magnetic pins on. It has a chuck style rotary axis although I would like to make a four wheel type to give me adjustment for bottles and the like, I have mad a TTL red dot pointer that is operated by an Arduino and a proximity switch on the lid, I have set it up to operate the air in the nozzle through RDWorks & a couple of relays.
I am using this machine to supplement my income along with a cnc router that i built and a Roland vinyl cutter.
Philip