I have a new cheap Chinese 60W laser. I have installed a dual water temperature display for tank temperature and return water temperature, I have also installed a milli-amp meter, 0-30mA. As I mainly cut vulcanized paper I can keep the power down low, between 20-50%.
After reading much on here and watching too many or maybe not enough of Russ Sadler's tutorials, it looks like I should be looking for a replacement tube to keep the machine , I'm sure there are good ones and not so good ones; I'm sure many of you have experience of tube selection.
Also anyone in the Seattle area? Be nice to bounce ideas off another.
Cheers Steve
Laser Tubes
-
Steven Ashley
- Posts: 4
- Joined: Thu Apr 04, 2019
- Location: Seattle, Washington, King
- Country: United States
- Nickname: Steve
- Laser Machine Make or Type: Orion 60W CO2
- Laser Power: 60W
- Laser Bed Size: 20" x 28"
- Home Position: TL
- RDWorks Version: 8
- Windows Version: 8
- Accessories: None yet....stay tuned
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete