LaserUser.com Forum (formerly RDWorksLab)

How would I save all the settings in the laser now, before something happens and the Ruida RDC6442G needs to be reset or I screw up something?
I have both RDWorks and LightBurn for controlling my 60W Yellow and Black 700x500.

https://www.youtube.com/watch?v=h9NCqTT3Sh8

Basically - turn on the laser and RDworks
On the user tab - select READ
Then Select Save - and save it as you would any other file

The select File - vendor settings - RD8888
Select Read - then save etc