First day new laser cutter
Posted: Fri Sep 06, 2019
Hi all,
Very excited to find a strong support community for laser cutters!
I'm getting into toy design (mainly wood kits) and just acquired a Ten-High 400x600mm laser cutter to help prototype and maybe do some production parts.
I've been avidly watching Russ's videos and looking through the forums for tips. When I saw that someone had rewritten the RDWorks manual, I realized this was the type of forum I should join! Not a lot I can contribute at this point, but hopefully I can provide some learnings if anything unique comes up.
Cheers from Ontario, Canada!
David
Very excited to find a strong support community for laser cutters!
I'm getting into toy design (mainly wood kits) and just acquired a Ten-High 400x600mm laser cutter to help prototype and maybe do some production parts.
I've been avidly watching Russ's videos and looking through the forums for tips. When I saw that someone had rewritten the RDWorks manual, I realized this was the type of forum I should join! Not a lot I can contribute at this point, but hopefully I can provide some learnings if anything unique comes up.
Cheers from Ontario, Canada!
David