Hello
Posted: Tue Sep 17, 2019
Mu name is Muhammad, I have the laser machine for couple months, I watched almost all Russ videos before ordering my machine and Russ helped me alot with specification "Thanks a 1000000 Russ".
my machine use an ERF (F4) 120W laser tube with bed size of 900*600mm working area, recently I discovered the LIGHTBURN software and since that day i stared using it.
I live in hot climate region so I am using water cooling made of an acrylic tank and modified water cooler to cool down the water.
Everything I earned is from Russ and I waiting eagerly to see his discussion and analysis for the result that he published on the 4th of September.
Most of my work is with wood veneer and acrylic.
Finlay thank you for accepting my in this wonderful forum.
Regards
my machine use an ERF (F4) 120W laser tube with bed size of 900*600mm working area, recently I discovered the LIGHTBURN software and since that day i stared using it.
I live in hot climate region so I am using water cooling made of an acrylic tank and modified water cooler to cool down the water.
Everything I earned is from Russ and I waiting eagerly to see his discussion and analysis for the result that he published on the 4th of September.
Most of my work is with wood veneer and acrylic.
Finlay thank you for accepting my in this wonderful forum.
Regards