New member
-
Ca Robinson
- Posts: 1
- Joined: Mon Sep 23, 2019
- Location: York, SC
- Country: United States
- Nickname: Andy
- Laser Machine Make or Type: Boss HP2436
- Laser Power: 150W
- Laser Bed Size: 24"x36"
- Home Position: TR
- RDWorks Version: v8.01.18
- Windows Version: 10 Pro
Hi, my name is Andy Robinson and I am new to this forum and to laser cutting/engraving. I have a used Boss HP2436 that I am learning and any advice is greatly welcomed. I have learned the importance of making sure your laser is properly aligned, as a trip from Florida to South Carolina on a trailer did not help this situation and apparently not good for the laser focus beam. Anyway, looking forward to learning from the group.
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Andy- we have quite a few Boss users here, so if you have questions, just ask. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased