New Member

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Ryan Campbell
Posts: 1
Joined: Tue Sep 24, 2019
Location: Cleveland, OH
Country: USA
Laser Machine Make or Type: China Blue/Dk. Grey
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.40-190314
Windows Version: Win10 x64
Accessories: Rotary Axis, Cloudray compound lens

My wife and I run a small t-shirt business. We had been interested in a laser cutter/engraver for quite some time, but were put off by the high cost of a brand name vs the high risk of a Chinese laser. I happened upon Russ' series on YouTube and commenced a binge fest.

Since we have a tight budget, it was relieving to see what is possible with these devices. We purchased a 50W (40W) blue/dark grey machine from ebay a couple of weeks ago. Although, I'm patiently awaiting the compound lens to arrive from China, I have been successful in quickly learning the unit.

My next step, after I churn out some pieces for an upcoming craft sale, will be to get the rotary attachment all figured out.
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Welcome Ryan. Lots of business opportunity with a laser, your creativity is the limit.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Post Reply

Return to “New Members - Introduce Yourself First”