Hello to all, my name is Ramon from Barcelona, Spain.
Setting up my just arrived CO2 laser machine, excited of being a newbie.
All the best, Ramon
Hello to all
-
Ramon Navarro
- Posts: 1
- Joined: Thu Nov 07, 2019
- Location: Barcelona
- Country: Spain
- Laser Machine Make or Type: HL-1060L 130W DSP
- Laser Power: 130W
- Laser Bed Size: 23" x 37"
- Home Position: TL
- RDWorks Version: v8
- Windows Version: 10
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Ramon. Looks like a hoss of a machine. Excited will be an understatement if you really get into it. Have fun with it and do some searching and reading in the forum. If you have not found him already, be sure and look up Russ on youtube with his learning lab videos. Good luck.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy