Hello
Posted: Tue Jan 21, 2020
New user here.
Built a Buildlog 2.x laser around 2011 with a Fullspectrumlaser controller (the old type they used in their converted K40 type lasers). The laser has not been used for several years, the controller starts to be a bit long in the tooth and when I started it up the other day, I couldn't connect to the controller. Possibly a firmware/software version mis-match. I bought a new Ruida 6445G controller instead, which brought me here, searching for a better manual than the original manual. Should soon manage to get it up and running again.
I also have a CNC router, converted CNC benchtop mill and lathe and a 3d printer, etc...
Built a Buildlog 2.x laser around 2011 with a Fullspectrumlaser controller (the old type they used in their converted K40 type lasers). The laser has not been used for several years, the controller starts to be a bit long in the tooth and when I started it up the other day, I couldn't connect to the controller. Possibly a firmware/software version mis-match. I bought a new Ruida 6445G controller instead, which brought me here, searching for a better manual than the original manual. Should soon manage to get it up and running again.
I also have a CNC router, converted CNC benchtop mill and lathe and a 3d printer, etc...