LaserUser.com Forum (formerly RDWorksLab)

Here is one of mine, totally useless but nevertheless

Maybe useful on your Lasers or other bit of shop gear.

I have been a bad Printer owner it has been over a week since I used any of them This is a redrawn print from another prior job.

Due to the size of the Fusion CAD and STL files the Zip is on my Google Drive here https://drive.google.com/open?id=1pfMaF ... 0YlHUuP1pk ** The knurl nut is not shown in the design due to laziness

It suits any length M6 Bolt as is with this or a similar dimension knurl nut (6x8 x 8.3 OD) as is or tweak the Fusion drawing to whatever you like. https://www.ebay.com.au/itm/5-25pcs-M2- ... %7Ciid%3A1 Make sure you have the brass nut nice and hot (200C+) before trying to insert it and the bolt as reheating will cause meltage of the knob. You can also skip adding the Bolt then you can use them on a stud or internal bolt as a hand nut.

A bit random but the Steel Weld Nuts shown work great inside the Aluminium Track available on evilbay or Ali Express https://www.aliexpress.com/item/4000228 ... 7463CSXTab if you need to make a jig or fixture.

Gratuitous use of Laser cut Acrylic on this Router Template for the corners.

Only 20 to go .....

This was one of yesterdays prints- when we put in new blinds on our front windows we lost the wand to open/close the blinds. I juryrigged a quick fix that 'kind of' worked... yesterday a designed a U-Joint to couple the dissimilar couplers... and Sweetie smiled.