I’m pretty new to laser cutting/engraving have a K40 which I’m upgrading. Made a rotary, adjustable bed, air assist and the like. About to do the 12” x 24” cutting area, installed a mini gerbil board and upgraded optics. Pretty much waiting, waiting, waiting for my parts to arrive. Plenty to do and learn! My 3D printers have come in handy. Looking forward to this board checking out.
Stay safe and look after you and yours. Paul
Hi, from Melbourne, Australia!
-
Paul Hammat
- Posts: 2
- Joined: Sat Apr 25, 2020
- Location: Melbourne
- Country: Australia
- Laser Machine Make or Type: K40
- Laser Power: 40w
- Laser Bed Size: 300x600
- Home Position: BR
- RDWorks Version: 8.01.18
- Windows Version: 10
- Accessories: Ai, red dots,
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
HI Paul,
welcome along. I am currently running a factory up specced K40 that I have had for a few years but I has run out of Bed space a long while ago
So I am building a 100W 1200x900 sized one at present.
If you need Tslot and bits Daniel at http://www.mkalu.com/index.asp or if you want V slot and motion bits then https://www.makerstore.com.au/ both in Melbourne. Just had my V slot turn up today..
welcome along. I am currently running a factory up specced K40 that I have had for a few years but I has run out of Bed space a long while ago
So I am building a 100W 1200x900 sized one at present.If you need Tslot and bits Daniel at http://www.mkalu.com/index.asp or if you want V slot and motion bits then https://www.makerstore.com.au/ both in Melbourne. Just had my V slot turn up today..