Page 1 of 1
Fill pattern does not show
Posted: Mon May 11, 2020
by Earl Andruskievicz
I am using an corel9 for projects.
so far it has served me well. I tried to design a model house with brick walls
tile roof and brick chimney. saved as normal and when I import to rdworks only sees the outlines
of the base walls windows roof and chimney. the brickwork fill and tile fills are not there.
Have tried corel online for help but dont see anything that explains how to preserve the fills.
Thanks for anyone that may have idea. Have tried online dxf convertors but they also lose the fill
Re: Fill pattern does not show
Posted: Mon May 11, 2020
by Pete Cyr
Earl Andruskievicz wrote: Mon May 11, 2020
I am using an corel9 for projects.
so far it has served me well. I tried to design a model house with brick walls
tile roof and brick chimney. saved as normal and when I import to rdworks only sees the outlines
of the base walls windows roof and chimney. the brickwork fill and tile fills are not there.
Have tried corel online for help but dont see anything that explains how to preserve the fills.
Thanks for anyone that may have idea. Have tried online dxf convertors but they also lose the fill
Take a look at this guys work - he has all kinds of Corel tips and tricks
https://www.youtube.com/channel/UCoPTrf ... e9tAluMzig
Re: Fill pattern does not show
Posted: Mon May 11, 2020
by Earl Andruskievicz
I have watched some of his tips. got some good stuff off his vids.
decided to draw my own textures, copy them then overlay my cuts.
Once I got a large enough pattern it is working good. Just takes time to
make up the patterns. Thanks
Re: Fill pattern does not show
Posted: Mon May 11, 2020
by Dave Vigness
LOL Try doing one of her craft boards and not finding out about the duplicate around a circle until you are half way and several hours into it. Deleted all my cut and paste and did it from start to finish in less than half an hour.
Re: Fill pattern does not show
Posted: Mon May 11, 2020
by Pete Cyr
Things that make you say. Hmmmm
Re: Fill pattern does not show
Posted: Mon May 11, 2020
by Dave Vigness
Yeah, learning some of the little tricks of Corel can be enlightening and frustrating at the same time. I've leanred to research some of the repeat and duplicate stuff before I start in. One offs aren't too bad, but when you have something you need to replicate and duplicate in a certain way, there is usually way to do it... if you hunt on the internet and YouTube long enough.