Hi from Norway
Posted: Sun Jul 19, 2020
I am a 55 year old man who has quit a good job, to do all the things I have tried to get time for.
To be able to build and do what I wanted, I first had to build a workshop with different departments:
A wood workshop with a CNC 3500mm x 1300 mm and
with a good number of fine machines from Felder in Austria: https://www.felder-group.com/de-at
An electronics workshop for all my PCBs and countless projects: https://newtone.no/workshop/services/
A welding workshop and all this to build a large recording studio: https://newtone.no/studio/facilities/
I have built a number of machines and have among other things, built this: https://norlinkmakes.com/projects/humphrey-2/
I also have a great interest in Hammond organs from 1935-1975 as well as all of Leslies. I have for many years made aftermarket products for these.I have also made cabinets and hardware in wood for Hammonds and Leslies.https://newtone.no/products/aftermarket/
I work a lot with acoustics issues in recording studios and where better acoustics are needed.I construct and make recording studios
I also run a programming department with a mutual friend, where we do things for manufacturers of electronic musical instruments, among other things.Here are a project conceived, totally developed, built(prototype) and sold to this manufacturer:https://www.viscountinstruments.com/leg ... nsole.html
The latest purchase of machines is a Redsail CM 1390 which I look forward to getting to know more about.
I hope in time to be a resource for this forum, but from now on, I will be a humble apprentice.T
To be able to build and do what I wanted, I first had to build a workshop with different departments:
A wood workshop with a CNC 3500mm x 1300 mm and
with a good number of fine machines from Felder in Austria: https://www.felder-group.com/de-at
An electronics workshop for all my PCBs and countless projects: https://newtone.no/workshop/services/
A welding workshop and all this to build a large recording studio: https://newtone.no/studio/facilities/
I have built a number of machines and have among other things, built this: https://norlinkmakes.com/projects/humphrey-2/
I also have a great interest in Hammond organs from 1935-1975 as well as all of Leslies. I have for many years made aftermarket products for these.I have also made cabinets and hardware in wood for Hammonds and Leslies.https://newtone.no/products/aftermarket/
I work a lot with acoustics issues in recording studios and where better acoustics are needed.I construct and make recording studios
I also run a programming department with a mutual friend, where we do things for manufacturers of electronic musical instruments, among other things.Here are a project conceived, totally developed, built(prototype) and sold to this manufacturer:https://www.viscountinstruments.com/leg ... nsole.html
The latest purchase of machines is a Redsail CM 1390 which I look forward to getting to know more about.
I hope in time to be a resource for this forum, but from now on, I will be a humble apprentice.T