Rowmark TriLayer Material
Posted: Mon Aug 24, 2020
This is a micro layered plastic with not one but two cap layers, one over the other and then a base color. I saw an offer from Johnson Plastics [ they bought Rowmark a couple years ago] for free samples so I applied and got a 5x5" approx sample- I expected a cap layer on both sides and contacted them that they had send a single color cap... they are very thin and I didn't realize there were two caps 
. I have been trying to get a sample of Duets where the caps are on both sides of base color and that was what I thought this was. Anyway- I practiced on the Green/Black/White sample as I do not care for green after 6 years in the Army National Guard- here is a sample for you'all, my machine was at 9% and 300mm/s for the first layer- the second layer is not as fussy. I actually use quite a bit of the plastics with one cap layer.
.
. I have been trying to get a sample of Duets where the caps are on both sides of base color and that was what I thought this was. Anyway- I practiced on the Green/Black/White sample as I do not care for green after 6 years in the Army National Guard- here is a sample for you'all, my machine was at 9% and 300mm/s for the first layer- the second layer is not as fussy. I actually use quite a bit of the plastics with one cap layer..