This is a must have for serious 3D print folk
Posted: Tue Sep 01, 2020
https://all3dp.com/2/meshmixer-tutorial ... mhide=true
I do most of my 3D work in Fusion 360 but often you need to modify an existing .stl file to get the part of it that is important to you personally. And often if you detach part of a print and print the parts separately you will get a much better whole after gluing it back together. I have been using it more and more for more and more 'things'- and it is free from the nice people at Autodesk.
I do most of my 3D work in Fusion 360 but often you need to modify an existing .stl file to get the part of it that is important to you personally. And often if you detach part of a print and print the parts separately you will get a much better whole after gluing it back together. I have been using it more and more for more and more 'things'- and it is free from the nice people at Autodesk.