LaserUser.com Forum (formerly RDWorksLab)

I have a blue Chinese made 100w CO2 laser cutter with a 900 x 600 millimetres table.
And so, being a newby and a clutz, I've managed to stuff up the settings, so would be very grateful if anyone assist me with the correct settings.

Many thanks in advance

Not sure what you have done [stuff up the settings?] but it may be helpful to record what you do have now- and learn how to save/read/record the files.
viewtopic.php?f=104&t=3459

We also have the user and vendor files for machines that members have sent in- if you pick a similar size/power machine it may help you get back to normal. - viewforum.php?f=100

Hey Gene,
Thanks for the sage advice. I have worked out how to save my current settings and I'm working on that read, write/save process.
I will also search for a posted similar machine and see if I can make use of those settings.
Again, thanks for the support and I'll let you know how I get on.

I have been called many things over the last 74 years, Jonathon, but sage is a new one. Thank you for a morning smile . Gene