Hello

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Joel Miller
Posts: 1
Joined: Mon Nov 02, 2020
Location: Bethel, MN
Country: USA
Laser Machine Make or Type: Aeon Mira 9
Laser Power: 100W
Laser Bed Size: 24" x 36"
Home Position: TR
RDWorks Version: V8.01.49
Ruida Controller: RDC6442
Windows Version: 10

My name is Joel Miller. I have a Aeon Mira 9 100W laser.
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Welcome Joel- if you are new to this laser I would advise recording the machine parameters before going further- the info is in the FAQ section. If you have questions, fire away- our members are very helpful. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Post Reply

Return to “New Members - Introduce Yourself First”