LaserUser.com Forum (formerly RDWorksLab)

Hi All,

I have a Boss Laser 1420 60W and, for the life of me, I can't seem to get the settings correct. I am using LaserBond 100 to etch onto a brass plaque plate. Anyone with setting recommendations?

Thanks everyone!

Denny

viewtopic.php?f=98&t=3446

Laser power and speed are ratios between lasers of different powers

In the link above are setting for laser bond 100.
For brass. A 30 watt machine running at 30w and 20”/sec....equal to 30w and 508mm/sec ......equals 23w@400mm/sec.....equal 14%@400mm/sec for a 60w machine

So for your machine I would start at 14%-20% @ 300 or 400mm/sec AND use a 0.05 interval
20% pwr @ 350mm/sec using a 0.05 interval is a good start for brass.....let me know how it works out


The brass has to be clean...no coatings, 2 even layers of laser bond

Thank you Pete! I will try the settings and let you know how I fair. Have a good weekend!