Made these for a Xmas Gift
I used the new Cermark spray. Works great
Bourbon Glass
-
John Baxter
- Posts: 7
- Joined: Sun Nov 15, 2020
- Location: Mableton
- Country: United States
- Nickname: Boosher1
- Laser Machine Make or Type: china
- Laser Power: 100
- Laser Bed Size: 24x36
- Home Position: TL
- RDWorks Version: 8
- Ruida Controller: RDC6442
- Windows Version: 7
You do not have the required permissions to view the files attached to this post.
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Very nice work- so Cermark has a spray for glass that makes the engraving that dark?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
No..cermark is bonded to the glass where the laser hitsGene Uselman wrote: Sun Dec 20, 2020 Very nice work- so Cermark has a spray for glass that makes the engraving that dark?
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Yep- kinda like... Cermark for metal? 
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Yes = it is the same stuff, it works on metal -ceramic glass etc
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
The nice man at Laserbond 100 just sent me a fresh spraycan to replace the last [defective] one. I will test that when [if] I ever get this laser sorted out. More parts coming this week.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Gary Thompson
- Posts: 31
- Joined: Tue Aug 27, 2019
- Location: Belfast
- Country: Northern Ireland
- Nickname: Gary
- Laser Machine Make or Type: Mantech
- Laser Power: 60W
- Laser Bed Size: 600 x 400
- Home Position: TL
- RDWorks Version: v8.01.16
- Windows Version: 10
- Accessories: Rotary attachment
John. That looks superb.
Thank you btw. I'd asked a while back if anyone had tried Cermark on glass and what the quality was like and that looks as good as I hoped it would. You've made up my mind. I'm getting a can.
Thank you btw. I'd asked a while back if anyone had tried Cermark on glass and what the quality was like and that looks as good as I hoped it would. You've made up my mind. I'm getting a can.
-
John Baxter
- Posts: 7
- Joined: Sun Nov 15, 2020
- Location: Mableton
- Country: United States
- Nickname: Boosher1
- Laser Machine Make or Type: china
- Laser Power: 100
- Laser Bed Size: 24x36
- Home Position: TL
- RDWorks Version: 8
- Ruida Controller: RDC6442
- Windows Version: 7
Gary
Heres what I got it Cermark Ultra 2oz can . heres the link
https://www.jpplus.com/cermark-ultra-sp ... er-marking
let me know if you have any more question.
Heres what I got it Cermark Ultra 2oz can . heres the link
https://www.jpplus.com/cermark-ultra-sp ... er-marking
let me know if you have any more question.
-
Gary Thompson
- Posts: 31
- Joined: Tue Aug 27, 2019
- Location: Belfast
- Country: Northern Ireland
- Nickname: Gary
- Laser Machine Make or Type: Mantech
- Laser Power: 60W
- Laser Bed Size: 600 x 400
- Home Position: TL
- RDWorks Version: v8.01.16
- Windows Version: 10
- Accessories: Rotary attachment
Thanks John. You may regret that offer 
1. Is that a vectorised graphic you used on the glass or your own design?
2. Did you alter the interval at all in scan mode? I've found different graphics can be improved by adjusting this - no logic to my method, just tinkering until I'm pleased.
3. Does the colouring remain on the glass for long? I'm wondering if it wears badly after repeated washing.
I'm in the United Kingdom and I've only found the 12oz can available here. It costs about £100 (140 USD) so I've not been able to convince myself it's a worthwhile purchase until now.
1. Is that a vectorised graphic you used on the glass or your own design?
2. Did you alter the interval at all in scan mode? I've found different graphics can be improved by adjusting this - no logic to my method, just tinkering until I'm pleased.
3. Does the colouring remain on the glass for long? I'm wondering if it wears badly after repeated washing.
I'm in the United Kingdom and I've only found the 12oz can available here. It costs about £100 (140 USD) so I've not been able to convince myself it's a worthwhile purchase until now.
-
Ian Bell
- Posts: 163
- Joined: Sat Nov 19, 2016
- Location: Bangor, N. Ireland
I checked out the link and a 2oz can is well worth a shot, but as Gary said it doesn't seem to be available in UK unless you go for the 12oz can. I'm busting to try this on some glass jars for myself, but as a personal use and general hobbyist at £100 I simply can't justify the purchase. If only there was a smaller capacity option available.
Location: Bangor
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10
Country: N. Ireland
Nickname: Ian
Laser Machine: Red/Blk Chinese import (Redsail clone ?)
Power: 80w
Bed Size: 500x700mm
Home: TR
Status: operational
RDWorks Version: V8.01.22
Windows Version: 10